Features:

(back to top)

PAC Model #IPACOEM - Universal iPod Interface

The iPac-OEM provides direct sound from your iPod™ into a factory stereo. No more sound degrading FM modulator. Get clean, high quality sound playing through your factory radio. The iPac-OEM works on the iPod™ mini, iPod video and 3rd generation iPods. The iPac-OEM charges the iPod™ while playing and automatically turns off the iPod™ when the radio is out of AUX-mode or when vehicle/radio is turned off (most vehicles). Change tracks on your iPod™ from the factory radio or steering wheel (vehicles with audio controls on steering wheel). No other auxiliary input available. The iPac-OEM consists of a Universal Auxiliary Audio Input interface and an Apple iPod™ interface connector.

Price: $159.95

(back to top)

Remote Control Interfaces

PAC Model #SW1-X - Steering Wheel Radio Control Interface
This universal "learning" remote allows you to retain the use of steering wheel or rear seat radio controls when replacing the factory head unit. It will interface most aftermarket stereos into most vehicles with steering wheel or rear seat audio controls, and works with virtually all aftermarket radios with wireless infrared remote capability using the common 38-40kHz carrier frequency. It also retains the use of heater control buttons on GM vehicles. The SWI-X is so universal that you only need one SKU# to cover over 95% of the vehicles made from 1986 to current. New vehicles coming out every year? No problem! Never be stuck with a vehicle specific type interface.

• Works for all major brand radios, including Alpine, Kenwood, Pioneer, JVC, Sony, Clarion, Blaupunkt, Eclipse, Panasonic, Rockford, Sanyo or just about any other brand out there.
• You can assign the buttons on the steering wheel to any infrared function on the remote, so you are never stuck with specific functions you don't want.
• With select Alpine headunits, the SWI-X can be modified to directly plug into the remote port of the Alpine headunit.
• Covers Ford, GM, Chrysler / Dodge, Acura, Audi, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Hummer, Infiniti, Jaguar, Land Rover, Lincoln, Mazda, Mercury, Mitsubishi, Nissan, Oldsmobile, Pontiac, Saab, Toyota, Volkswagan, and Harley Davidson motor cycles.

To view an application guide in PDF format, CLICK HERE

Price $69.95

(back to top)

PAC Model #OEM-2 - Factory Sound System Interface
A one-piece solution for replacing the radio or adding an amplifier to any factory system. By isolating the system, providing a 4 channel signal level converter, an internal remote trigger and a common ground speaker conversion circuit, the OEM-2 is truly a multi-problem solution.

• Adjusts up to 4 channels of signal input from 2 to 60 watts
• Isolates the input and output circuits, blocking DC noise and preventing snaps, crackles and pops typical in other products.
• Sealed potentiometers prevent circuit-induced distortion and signal drift.
• Allows for conversion of floating ground head units to match common ground speakers systems.
• Provides an internal trigger to turn on a 2 amp/12 volt power line with a 1second delay for an amplifier or power antenna.
• Delivers linear frequency response /-0.5 dB from 20 to 20,000 Hz, for unparalleled sound quality.

Price $39.95

IMPORTANT NOTE: The OS-1will not work with OnStar® equipped vehicles that have factory radios with RDS (Class 2 headunits). Factory radio's with RDS can be indendified by locating an RDS logo on the front face of the factory radio. OS-1 currently supports trucks and SUV's from 1996-2001 and 1999-2002 Pontiac Gran Prix. but not the Grand Prix with Bose®s.

Price $99.95

PAC Model #OS-1Bose - OnStar Interface
The OS-1Bose® is a complete kit designed for GM Bose® equipped vehicles. It comes with an OS-1 and an OEM-1 Bose® interface.

The OS-1Bose® will not work with OnStar® equipped vehicles that have factory radios with RDS (Class 2 headunits). Factory radio's with RDS can be indendified by locating an RDS logo on the front face of the factory radio. OS-1Bose® currently supports trucks and SUV's from 1996-2002.

Price $119.95

PAC Model #OS-2 - OnStar Interface
OnStar® Interface for Class 2 non-Bose vehicles. The OS-2 uses a Data Link Controller chip (DLC) that is specifically designed for connecting to GM's Class 2 data bus.

• Safe & Sound Class 2 circuitry will not disable vehicle data bus even if interface loses power.
• When OnStar® is active, the OS-2 will keep OnStar® on even when the key is removed and the door is opened. OnStar® will turn off when the call is complete.
• OnStar® active LED and Ignition on LED for visual indication.
• Provides +12v switched accessory output. No more searching for switched +12v in fuse box or kickpanel.
• Smart Sense Mute output to either mute the aftermarket radio or to turn it off when OnStar® is active.
• Retains door chimes when used with optional CM1 chime module.
• New radio will operate with the vehicle RAP (Retained Accessory Power) system. The radio stays on after the key is turned off and stays on for aproximately 10 minutes or until a door is opened.

NOTE: These headunits have only 3 EQ settings. If the unit has only 5 or more EQ settings, then the OS-2BOSE is required. First half of 2004 have 5or more EQ settings and second half of 2004 use only 3 EQ settings. 2. The OS-2 does not retain the factory XM receiver, rear seat DVD or the rear center console controls. You will lose the XM/DVD and rear console option when the factory radio is replaced with an aftermarket radio. 3 . If you are not retaining the Bose amplifier, use this OS-2 interface instead of OS-2BOSE interface. CM1 is also required if Bose amp is bypassed. 4. FAQ's about GM's Class 2 here. Note 2: If you take your vehicle to the GM dealer to have it upgraded with a new software update, please remove this product prior to going to the GM Dealer. The reason is that the product does not go into offline mode which will show as an error to the scan tool the dealer uses.

Price $129.95

PAC Model #OS-2BOSE - OnStar Interface
OnStar® Interface for Class 2 vehicles with Bose® sound systems. Same as OS-2 above but without an onboard amplifier for OnStar® audio. The OnStar® audio is amplified using the factory amplifier.

• OnStar® Volume control via factory steering wheel audio controls on selected vehicles*. Radio controls can be retained to control new radio by using PAC's SWI-X.
• Unlike some other interfaces on the market, when OnStar® is active, the OS-2 will keep OnStar® on even when the key is removed and the door is opened. OnStar® will turn off when the call is complete.
• Retains door chimes when used with optional CM1 chime module. Also retains Vehicle Parking Assist chimes.
• So universal it works with Premium Bose® or Standard Bose® sound systems.

NOTE: These headunits have 5 or more EQ settings. If the unit has only 3, then the OS-2 and CM1 are required. First half of 2004 have 5or more EQ settings and second half of 2004 use only 3 EQ settings. 2 . The OS-2Bose® does not retain the factory XM receiver, rear seat DVD or the rear center console controls. You will lose the XM/DVD and rear console option when the factory radio is replaced with an aftermarket radio. 3. If the factory Bose® amplifier is not being used, use the OS-2 interface. 4. *These vehicles have a premium Bose® amp that only accepts 2 channel audio inputs. The aftermarket radio will not fade, however it will still continue to balance. 5. You may use this interface even if the vehicle does not have OnStar® but need to interface the Bose® amplifier. Note 2: If you take your vehicle to the GM dealer to have it upgraded with a new software update, please remove this product prior to going to the GM Dealer. The reason is that the product does not go into offline mode which will show as an error to the scan tool the dealer uses.

Price $129.95

PLEASE NOTE: All of our accessory products have a full factory warranty against any defect. However, since a wide range of configurations may be used or considered, and a variety of causes may be responsible for faulty operation of your equipment, we cannot guarantee that any device you purchase to ameliorate ongoing problems will be effective in all cases. Purchase of interfaces, noise filters, antenna & signal boosters, and other remedial or ancillary devices is at your own risk, and returns are not allowed.

Designed & Managed by
MetroDirect Communications
Electronixwarehouse - Speakerstore - Ampdepot - Powercaps
Web Site Design, Hosting, Promotion, And Management
Home - Policies - Shipping Info - How To Order - Order Inquiry - Contact
Copyright © 2000 - 2006 MetroDirect Communications. Use of any material appearing on this site without specific written permission from MetroDirect Communications is prohibitied by law.